Written on May 03, 2010 By Dan O'Connor

The Dao of Dewalt

One of my first manufacturing jobs was in a small shop making precision rifles. We did the whole nine yards. Drilled, reamed and rifled the barrels. Machined the bolt actions and made the gunstocks out of beautiful California Claro walnut.

One of the jobs was grinding angles on the bolt handle before it was welded onto the bolt. These angles were important in that they had to nestle nicely into the action body when the bolt was closed and locked.

The Daily Grind

The grinding was done freehand on a belt sander. A template was provided to check the angles against, but otherwise the only control was the skill of the guy doing the grinding. Now that I have spent a lifetime in manufacturing I can see that it was a poor way to control a process. I did however, start me down the path of understanding the connection between mind and body.

I ruined probably 30 of the first ones I tried to grind. Grind a little bit, test, grind a little bit more, test,grind some more-Crap-throw it away-do it again.

I don’t know at what point when I actually entered the zone. 200 pieces, 500 pieces, a thousand-I don’t know. All I know is that there were 3 angles on the part and I was doing it in 3 moves. Grind, rotate, grind, rotate, grind, drop in bucket. I took you longer to read this than it took me to do it. I didn’t even check them and they always fit beautifully. I did not check them because I could feel that they are right. If one happened to not feel right I would set it aside and more than likely it would need some adjustment.

Peace in the Mess

But more importantly it was how I felt while I was doing it. It was loud, dirty, nasty work and I felt wonderful. I was at peace with all the world. All my attention was focused on my task but another part of was free to drift. It was as if the intense task at hand captured all of my logical brain and my subconscious? was allowed to roam free. It was magic amid the heat, dust and noise.

Fast forward 25 years and I was in the middle of a hay field I had purchased 3 years earlier. I was not ready to build a house yet but I had to do something and a fence to define the house site and a shed for shelter and shade was just the ticket.

I was now no stranger to this sometimes elusive idea of working in the zone.

I had set all the posts (that is another story) and I was attaching the horizontal boards that define the fence itself.
There has been millions of dollars spent I am sure researching the best was to construct a power driven screw. There is nothing more exasperating than having the head of the screw strip out or have the driver jump out of screw head half way into a board. I have settled on using deck screws with a modified Phillips head that seem to work the best.

A Mans Best Friend is His Drill

Except for the heavy bolts for the beams I have used these almost exclusively in my house. Very few nails and about a 100,000 screws so far.
I had no electricity so I purchased an 18V cordless drill and circular saw set by Dewalt. This along with a couple extra batteries and a car charger would keep me going all weekend. They are both still going strong.

As I learned to use the drill I would press very hard on it to keep it from jumping out. After a hundred screws or so I was tired and my hands, arms, shoulders and back hurt. Luckily it was time to quit for the day. Early the next morning I was at it again. As the day wore on it got easier. I had to put less and less pressure on the drill to get it to stay engaged. At one point much to my amazement I had to only squeeze it with thumb and forefinger with no pressure applied by my arm. It was as if the drill was being sucked in with screw.

As I continued to work I realized that I could “feel” when the axis of the drill was perfectly lined up with the axis of the screw and the direction of travel. And it was so pleasurable. I didn’t care about getting the work done I just wanted to stay on this high. This overwhelming narcotic. My body had learned the mechanics of the work though mindful repetition. It hooked up with the command center (my brain) and together they worked as a team sending and receiving the millions of tiny signals and transmitting them into minute muscular adjustments.

No Easy Answers

What an absolute miracle-And I was aware of it all. It seemed as if the whole world flowed through me into those small screws and then into the wood. When at last I came to the sun was low in the sky, there were no more boards and I had a fence. The joy of seeing the fence complete took a back seat to the feeling of loss as whatever had held me faded away. It had not left me completely though. A little piece of it remained. I carry a small piece of everything I have ever made with me and everything I have ever made carries a small piece of me.

I would like to tell you that there is an easy way but I cannot. The key is repetition. Doing it over and over and over again-mindfully. I believe it was Andre Agassi that would practice 1000 backhands a day, then 1000 serves a day.

I don’t care who you are or what you are doing, if you practice mindful repetition you will get better. If you do this I guarantee that the goal of the doing will take a back seat to the doing itself.


  1. Greetings from Colorado! I’m bored to tears at work so I decided to check out your site on my iphone during lunch break. I enjoy the info you provide here and can’t wait to take a look when I get home. I’m amazed at how fast your blog loaded on my cell phone .. I’m not even using WIFI, just 3G .. Anyhow, wonderful site!

  2. Greetings! This is my first comment here so I just wanted to give a quick shout out and tell you I really enjoy reading your blog posts. Can you suggest any other blogs/websites/forums that deal with the same topics? Thanks a lot!

    • Franziska says:

      I have come to find out that with Makita there are different lines of baeiertts and tools, and both tool and battery have to have a star engraved to prove they’re authentic and have the overload protection. Mine do, and I did the same test those guys did, it cuts off, overload protection is there. I think TIA got their set from some online discount tool company, possibly even a recon set, who knows. They buy a lot of their stuff from Tyler tool and other online discount tool warehouses, so who knows what they bought and were really using. A fair test would be showing the receipt from Home Depot and the stars one both tool and battery before performing it on youtube. You cannot believe a couple of guys in a garage who also back DeWalt and Ridgid as their choice tools.

  3. I didn’t took the time to figure out if it is interesting, but it could inspire you:

  4. Howdy! Do you’re sure if many make whatever plugins to with SEARCH ENGINE OPTIMISATION? I’m looking for ways to my web page to rank for some targeted key terms but We’re not seeing top notch gains. If you’re sure of whatever please present. Cheers!

  5. Web Design says:

    this for a long time now – maybe luck is more complex than yahoo and google

  6. mobile games says:

    Hello, I believe your website might be having internet browser compatibility issues.
    When I look at your website in Safari, it looks fine however, if opening in Internet Explorer, it’s got some overlapping issues.
    I merely wanted to provide you with a quick heads up!
    Apart from that, fantastic blog!

  7. Hello! I simply want to give you a huge thumbs up for the great
    information you have got right here on this post.
    I will be coming back to your website for more soon.

    Also visit my web blog clumsy ninja cheats

  8. ruch essay says:

    Sometimes some articles and writing materials are very good but we are not able to focus on these articles and some time our articles are boring but we giving it importance. So it varies in the different situations and we can choose all the ideas to write.

  9. This is really good published article. Such a great yet interesting post. Thank you very much for sharing this useful stuff.

  10. Good information. Lucky me I discovered your blog by accident (stumbleupon).
    I’ve book marked it for later!

  11. Your approach to this post is unique and appreciating. I could suppose you're an expert in this subject. Thanks for sharing this valuable information.

  12. Hello, I think your blog might be having browser
    compatibility issues. When I look at your website in Firefox, it looks fine but when opening in Internet Explorer, it has some overlapping.
    I just wanted to give you a quick heads up!
    Other then that, wonderful blog!

  13. It’s hard to find well-informed people in this particular topic, however, you seem like you know what you’re
    talking about! Thanks

  14. It’s going to be end of mine day, except before ending I am reading
    this fantastic post to increase my knowledge.

  15. I have read so many articles or reviews concerning the blogger lovers but this article is
    in fact a nice piece of writing, keep it up.

  16. Wow, amazing blog structure! How lengthy have you ever been blogging for?

    you made running a blog look easy. The whole glance of your
    website is excellent, let alone the content material!

  17. It’s fantastic that you are getting thoughts from this piece of writing as well as
    from our dialogue made at this place.

Leave a Reply to website design mauritius

Featuring Recent Posts WordPress Widget development by YD

} catch(err) {}